1 data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s speci? cations are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. 2. this datasheet has only typical speci? cations because there is no space for detailed speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. http://www.murata.com/ 1 noise suppression products/emi suppression filters > common mode choke coil > film type (array) 2012.9.6 o this data sheet is applied for chip common mode choke coil used for general electronics equipment for your design. common mode choke coil film type (array) dlp2ad series (0804 size) c dimensions 0.820.1 0.250.1 0.50.1 (1) (2) (3) (4) (5) (6) (7) (8) 2.00.1 1.00.1 0.250.15 (in mm) : electrode c equivalent circuit (1) (5) (6) (7) (8) (2) (3) (4) no polarity. c impedance-frequency characteristics (main items) dlp2ada series frequency (mhz) impedance ( ) 1000 100 10 1 1 10 100 1000 10000 dlp2ada900hl4 common mode differential mode dlp2ada900hl4 dlp2ada670hl4 dlp2ada350hl4 dlp2ada670hl4 dlp2ada350hl4 c impedance-frequency characteristics (main items) dlp2adn series impedance ( ) frequency (mhz) 1 10 100 1000 10000 1 10 100 1000 10000 dlp2adn281hl4 dlp2adn281hl4 differential mode common mode dlp2adn241hl4 dlp2adn201hl4 dlp2adn161hl4 dlp2adn121hl4 dlp2adn900hl4 dlp2adn670hl4 dlp2adn241hl4 dlp2adn201hl4 dlp2adn161hl4 dlp2adn121hl4 dlp2adn900hl4 dlp2adn670hl4 dlp2ada series frequency (mhz) insertion loss (db) 0 2 4 6 8 10 10 100 1000 10000 dlp2ada900hl4 dlp2adn series frequency (mhz) insertion loss (db) 0 2 4 6 8 10 1 10 100 1000 10000 dlp2adn900hl4 continued on the following page. c differential mode transmission characteristics (typ.) c differential mode transmission characteristics (typ.)
2 data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s speci? cations are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. 2. this datasheet has only typical speci? cations because there is no space for detailed speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. http://www.murata.com/ 2 noise suppression products/emi suppression filters > common mode choke coil > film type (array) 2012.9.6 o this data sheet is applied for chip common mode choke coil used for general electronics equipment for your design. continued from the preceding page. c packaging code packaging minimum quantity l 180mm embossed tape 3000 b bulk(bag) 500 c rated value ( p : packaging code) part number common mode impedance (at 100mhz/20c) rated current rated voltage insulation resistance (min.) withstand voltage dc resistance operating temperature range dlp2ada350hl4 p 35ohm 20% 150ma 5vdc 100m ohm 12.5vdc 0.8ohm25% -40 to +85c dlp2ada670hl4 p 67ohm 20% 130ma 5vdc 100m ohm 12.5vdc 1.0ohm25% -40 to +85c dlp2ada900hl4 p 90ohm 20% 120ma 5vdc 100m ohm 12.5vdc 1.4ohm25% -40 to +85c dlp2adn670hl4 p 67ohm 20% 140ma 5vdc 100m ohm 12.5vdc 1.3ohm25% -40 to +85c dlp2adn900hl4 p 90ohm 20% 130ma 5vdc 100m ohm 12.5vdc 1.7ohm25% -40 to +85c dlp2adn121hl4 p 120ohm 20% 120ma 5vdc 100m ohm 12.5vdc 2.0ohm25% -40 to +85c dlp2adn161hl4 p 160ohm 20% 100ma 5vdc 100m ohm 12.5vdc 2.5ohm25% -40 to +85c dlp2adn201hl4 p 200ohm 20% 90ma 5vdc 100m ohm 12.5vdc 3.2ohm25% -40 to +85c dlp2adn241hl4 p 240ohm 20% 80ma 5vdc 100m ohm 12.5vdc 3.8ohm25% -40 to +85c dlp2adn281hl4 p 280ohm 20% 80ma 5vdc 100m ohm 12.5vdc 4.6ohm25% -40 to +85c number of circuit: 2 c ! caution/notice ! caution (rating) do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. notice solderability of tin plating termination chip might be deteriorated when low temperature soldering pro? le where peak solder temperature is below the tin melting point is used. please con? rm the solderability of tin plating termination chip before use.
|
